5 Advantages of Automatic Driving Lessons

Automatic Driving Lessons Birmingham

It is difficult for a person to define the boundary between a treated and untreated area. The use of wide-grip devices complicates the task. Driving school Birmingham And if the work is carried out in insufficient lighting, then it is simply impossible to avoid gaps and overlaps. The solution to this problem will be the introduction of a parallel driving system.

This tool is a good investment in economical and profitable farming. The system will reduce fuel consumption and increase yields thanks to uniform application of fertilizers and crop protection products. The total cost of processing a hectare is also reduced, as downtime is reduced. The route will be optimized and the work will be carried out faster. This will save hours.

Modern parallel driving systems consist of a GPS receiver, a main module and a variety of wires for connecting to the power and connecting the antenna to the main module.

The equipment can be quickly and easily installed on any tractor. It doesn't take long to set up the system. It is also easy to learn. When working, the operator needs to enter the grip width and fix the coordinates of the start of movement. And after the first pass, indicate the end point of the movement. The device will independently analyze the data, build parallel lines, save them in memory and display the heading indicator on the monitor. The technique works with the help of satellite navigation systems in both straight and curved lines, minimizing overlaps and under-revenues

The main difference between the autopilot and the parallel driving system is that it provides precise movement without operator assistance. Automatic driving lessons Wolverhampton the route is processed by a GPS receiver and a navigation controller. If the tractor deviates from the set course, a correction is automatically made. The refined data is sent directly to the hydraulic chassis control system, minimizing steering play. The signals are transmitted via the CAN bus connecting the autopilot and tractor implements. Additionally, the steering angle of the wheels is monitored by a special sensor.

But still, such a tool cannot work without a tractor driver. The autopilot does not see obstacles in the field, and the route must be controlled. But even with this disadvantage, the device will significantly improve performance.

The principle of the autopilot is quite simple. The tractor is installed at the beginning of the section, and the operator sets the type of movement. There are several options here: driving in straight parallel lines, driving on a field contour, or manual driving settings. When moving along straight lines, it is enough to indicate the start and end points. In case of non-rectilinear movement, the first pass is made by the operator, after which the autopilot is switched on and the tractor repeats the movements along the set curve.

The system switches to manual mode at any turn of the steering wheel, and is reactivated by pressing the corresponding key.

Comfortable, simple controls make life easier for the farmer Birmingham     driving lesson. It is necessary to pay attention to the buttons - they should be conveniently located and not too small in size. Small buttons scattered across the instrument panel will complicate the life of the operator

When buying a navigator, pay attention that it supports the basic functions: driving in a straight line; voluntary driving; fixing areas for work; storing data in the device's memory and the possibility of editing them - extending the sections, designating the processed zones, various markers.